Sequencer API#

The sequencer module is responsible for adding the parameters of a single sequencer within a module.

class qblox_instruments.qcodes_drivers.sequencer.Sequencer(parent: Instrument | InstrumentChannel, name: str, seq_idx: int)[source]#

Bases: InstrumentChannel

This class represents a single sequencer. It combines all sequencer specific parameters and functions into a single QCoDes InstrumentChannel.

__init__(parent: Instrument | InstrumentChannel, name: str, seq_idx: int)[source]#

Creates a sequencer class and adds all relevant parameters for the sequencer.

Parameters:

parent (Union[Instrument, InstrumentChannel]) – The QCoDeS class to which this sequencer belongs.
name (str) – Name of this sequencer channel
seq_idx (int) – The index of this sequencer in the parent instrument, representing which sequencer is controlled by this class.

property seq_idx: int#

Get sequencer index.

Returns:: Sequencer index
Return type:: int

set_trigger_thresholding(address: int, count: int, invert: bool) → None[source]#

Sets threshold for designated trigger address counter, together with the inversion condition. Thresholding condition used: greater than or equal.

Parameters:

address (int) – Trigger address to which the settings are applied
count (int) – Threshold
invert (bool) – Comparison result inversion

Raises:

NotImplementedError – Functionality not available on this module.

get_trigger_thresholding(address: int) → Tuple[source]#

Gets threshold for designated trigger address counter, together with the inversion condition. Thresholding condition used: greater than or equal.

Parameters:

address (int) – Trigger address to which the settings are applied

Returns:

int – Threshold
bool – Comparison result inversion

Raises:

NotImplementedError – Functionality not available on this module.

reset_trigger_thresholding() → None[source]#

Resets trigger thresholds for all trigger address counters (T1 to T15) back to 0. Also resets inversion back to false.

Raises:: NotImplementedError – Functionality not available on this module.

Cluster QCoDeS parameters#

QCoDeS parameters generated by Sequencer.

Cluster QCM parameters#

Sequencer.connect_out0()#

Sets/gets whether this sequencer is connected to output 0, and if so which component.

Properties:

value: Enum: {‘Q’, ‘off’, ‘I’}

Sequencer.connect_out1()#

Sets/gets whether this sequencer is connected to output 1, and if so which component.

Properties:

value: Enum: {‘Q’, ‘off’, ‘I’}

Sequencer.connect_out2()#

Sets/gets whether this sequencer is connected to output 2, and if so which component.

Properties:

value: Enum: {‘Q’, ‘off’, ‘I’}

Sequencer.connect_out3()#

Sets/gets whether this sequencer is connected to output 3, and if so which component.

Properties:

value: Enum: {‘Q’, ‘off’, ‘I’}

Sequencer.sync_en()#

Sets/gets sequencer synchronization enable which enables party-line synchronization.

Properties:

value: Boolean

Sequencer.nco_freq()#

Sets/gets sequencer NCO frequency in Hz with a resolution of 0.25 Hz. Be aware that the outputs have low-pass filters with a cut-off frequency of 350 MHz

Properties:

unit: Hz
value: Numbers -500000000.0<=v<=500000000.0

Sequencer.nco_phase_offs()#

Sets/gets sequencer NCO phase offset in degrees with a resolution of 3.6e-7 degrees.

Properties:

unit: Degrees
value: Numbers 0<=v<=360

Sequencer.nco_prop_delay_comp()#

Sets/gets a delay that compensates the NCO phase to the input path with respect to the instrument’s combined output and input propagation delay. This delay is applied on top of a default delay of 146 ns.

Properties:

unit: ns
value: Numbers -50<=v<=50

Sequencer.nco_prop_delay_comp_en()#

Sets/gets the enable for a delay that compensates the NCO phase to the input path with respect to the instrument’s combined output and input propagation delay. This delays the frequency update as well.

Properties:

unit: ns
value: Boolean

Sequencer.marker_ovr_en()#

Sets/gets sequencer marker override enable.

Properties:

value: Boolean

Sequencer.marker_ovr_value()#

Sets/gets sequencer marker override value. Bit index corresponds to marker channel index.

Properties:

value: Numbers 0<=v<=15

Sequencer.sequence()#

Sets sequencer’s AWG waveforms, acquistion weights, acquisitions and Q1ASM program. Valid input is a string representing the JSON filename or a JSON compatible dictionary.

Properties:

value: MultiType: Strings, Dict

Sequencer.trigger1_count_threshold()#

Sets/gets threshold for counter on trigger address T1. Thresholding condition used: greater than or equal.

Properties:

value: Numbers 0<=v<=65535

Sequencer.trigger1_threshold_invert()#

Sets/gets comparison result inversion for triggeraddress 1.

Properties:

value: Boolean

Sequencer.trigger2_count_threshold()#

Sets/gets threshold for counter on trigger address T2. Thresholding condition used: greater than or equal.

Properties:

value: Numbers 0<=v<=65535

Sequencer.trigger2_threshold_invert()#

Sets/gets comparison result inversion for triggeraddress 2.

Properties:

value: Boolean

Sequencer.trigger3_count_threshold()#

Sets/gets threshold for counter on trigger address T3. Thresholding condition used: greater than or equal.

Properties:

value: Numbers 0<=v<=65535

Sequencer.trigger3_threshold_invert()#

Sets/gets comparison result inversion for triggeraddress 3.

Properties:

value: Boolean

Sequencer.trigger4_count_threshold()#

Sets/gets threshold for counter on trigger address T4. Thresholding condition used: greater than or equal.

Properties:

value: Numbers 0<=v<=65535

Sequencer.trigger4_threshold_invert()#

Sets/gets comparison result inversion for triggeraddress 4.

Properties:

value: Boolean

Sequencer.trigger5_count_threshold()#

Sets/gets threshold for counter on trigger address T5. Thresholding condition used: greater than or equal.

Properties:

value: Numbers 0<=v<=65535

Sequencer.trigger5_threshold_invert()#

Sets/gets comparison result inversion for triggeraddress 5.

Properties:

value: Boolean

Sequencer.trigger6_count_threshold()#

Sets/gets threshold for counter on trigger address T6. Thresholding condition used: greater than or equal.

Properties:

value: Numbers 0<=v<=65535

Sequencer.trigger6_threshold_invert()#

Sets/gets comparison result inversion for triggeraddress 6.

Properties:

value: Boolean

Sequencer.trigger7_count_threshold()#

Sets/gets threshold for counter on trigger address T7. Thresholding condition used: greater than or equal.

Properties:

value: Numbers 0<=v<=65535

Sequencer.trigger7_threshold_invert()#

Sets/gets comparison result inversion for triggeraddress 7.

Properties:

value: Boolean

Sequencer.trigger8_count_threshold()#

Sets/gets threshold for counter on trigger address T8. Thresholding condition used: greater than or equal.

Properties:

value: Numbers 0<=v<=65535

Sequencer.trigger8_threshold_invert()#

Sets/gets comparison result inversion for triggeraddress 8.

Properties:

value: Boolean

Sequencer.trigger9_count_threshold()#

Sets/gets threshold for counter on trigger address T9. Thresholding condition used: greater than or equal.

Properties:

value: Numbers 0<=v<=65535

Sequencer.trigger9_threshold_invert()#

Sets/gets comparison result inversion for triggeraddress 9.

Properties:

value: Boolean

Sequencer.trigger10_count_threshold()#

Sets/gets threshold for counter on trigger address T10. Thresholding condition used: greater than or equal.

Properties:

value: Numbers 0<=v<=65535

Sequencer.trigger10_threshold_invert()#

Sets/gets comparison result inversion for triggeraddress 10.

Properties:

value: Boolean

Sequencer.trigger11_count_threshold()#

Sets/gets threshold for counter on trigger address T11. Thresholding condition used: greater than or equal.

Properties:

value: Numbers 0<=v<=65535

Sequencer.trigger11_threshold_invert()#

Sets/gets comparison result inversion for triggeraddress 11.

Properties:

value: Boolean

Sequencer.trigger12_count_threshold()#

Sets/gets threshold for counter on trigger address T12. Thresholding condition used: greater than or equal.

Properties:

value: Numbers 0<=v<=65535

Sequencer.trigger12_threshold_invert()#

Sets/gets comparison result inversion for triggeraddress 12.

Properties:

value: Boolean

Sequencer.trigger13_count_threshold()#

Sets/gets threshold for counter on trigger address T13. Thresholding condition used: greater than or equal.

Properties:

value: Numbers 0<=v<=65535

Sequencer.trigger13_threshold_invert()#

Sets/gets comparison result inversion for triggeraddress 13.

Properties:

value: Boolean

Sequencer.trigger14_count_threshold()#

Sets/gets threshold for counter on trigger address T14. Thresholding condition used: greater than or equal.

Properties:

value: Numbers 0<=v<=65535

Sequencer.trigger14_threshold_invert()#

Sets/gets comparison result inversion for triggeraddress 14.

Properties:

value: Boolean

Sequencer.trigger15_count_threshold()#

Sets/gets threshold for counter on trigger address T15. Thresholding condition used: greater than or equal.

Properties:

value: Numbers 0<=v<=65535

Sequencer.trigger15_threshold_invert()#

Sets/gets comparison result inversion for triggeraddress 15.

Properties:

value: Boolean

Sequencer.cont_mode_en_awg_path0()#

Sets/gets sequencer continous waveform mode enable for AWG path 0.

Properties:

value: Boolean

Sequencer.cont_mode_waveform_idx_awg_path0()#

Sets/gets sequencer continous waveform mode waveform index or AWG path 0.

Properties:

value: Numbers 0<=v<=1023

Sequencer.upsample_rate_awg_path0()#

Sets/gets sequencer upsample rate for AWG path 0.

Properties:

value: Numbers 0<=v<=65535

Sequencer.gain_awg_path0()#

Sets/gets sequencer gain for AWG path 0.

Properties:

value: Numbers -1.0<=v<=1.0

Sequencer.offset_awg_path0()#

Sets/gets sequencer offset for AWG path 0.

Properties:

value: Numbers -1.0<=v<=1.0

Sequencer.cont_mode_en_awg_path1()#

Sets/gets sequencer continous waveform mode enable for AWG path 1.

Properties:

value: Boolean

Sequencer.cont_mode_waveform_idx_awg_path1()#

Sets/gets sequencer continous waveform mode waveform index or AWG path 1.

Properties:

value: Numbers 0<=v<=1023

Sequencer.upsample_rate_awg_path1()#

Sets/gets sequencer upsample rate for AWG path 1.

Properties:

value: Numbers 0<=v<=65535

Sequencer.gain_awg_path1()#

Sets/gets sequencer gain for AWG path 0.

Properties:

value: Numbers -1.0<=v<=1.0

Sequencer.offset_awg_path1()#

Sets/gets sequencer offset for AWG path 1.

Properties:

value: Numbers -1.0<=v<=1.0

Sequencer.mixer_corr_phase_offset_degree()#

Sets/gets sequencer mixer phase imbalance correction for AWG; applied to AWG path 1 relative to AWG path 0 and measured in degrees

Properties:

value: Numbers -45.0<=v<=45.0

Sequencer.mixer_corr_gain_ratio()#

Sets/gets sequencer mixer gain imbalance correction for AWG; equal to AWG path 1 amplitude divided by AWG path 0 amplitude.

Properties:

value: Numbers 0.5<=v<=2.0

Sequencer.mod_en_awg()#

Sets/gets sequencer modulation enable for AWG.

Properties:

value: Boolean

arm_sequencer() → None

Prepare the indexed sequencer to start by putting it in the armed state. If no sequencer index is given, all sequencers are armed. Any sequencer that was already running is stopped and rearmed. If an invalid sequencer index is given, an error is set in system error.

Raises:: RuntimeError – An error is reported in system error and debug <= 1. All errors are read from system error and listed in the exception.

Note

This method calls Cluster.arm_sequencer using functools.partial to set the slot index. The docstring above is of Cluster.arm_sequencer:

Note

This method calls Module.arm_sequencer using functools.partial to set the sequencer index. The docstring above is of Module.arm_sequencer:

clear_sequencer_flags() → None: Clear flags

Note

This method calls Cluster.clear_sequencer_flags using functools.partial to set the slot index. The docstring above is of Cluster.clear_sequencer_flags:

Note

This method calls Module.clear_sequencer_flags using functools.partial to set the sequencer index. The docstring above is of Module.clear_sequencer_flags:

connect_sequencer(*connections: str) → None

Makes new connections between the indexed sequencer and some inputs and/or outputs. This will fail if a requested connection already existed, or if the connection could not be made due to a conflict with an existing connection (hardware constraints). In such a case, the channel map will not be affected.

Parameters:

*connections (str) – Zero or more connections to make, each specified using a string. The string should have the format <direction><channel> or <direction><I-channel>_<Q-channel>. <direction> must be in to make a connection between an input and the acquisition path, out to make a connection from the waveform generator to an output, or io to do both. The channels must be integer channel indices. If only one channel is specified, the sequencer operates in real mode; if two channels are specified, it operates in complex mode.

Raises:

RuntimeError – If the connection command could not be completed due to a conflict.
ValueError – If parsing of a connection fails.

Note

This method calls Cluster.connect_sequencer using functools.partial to set the slot index. The docstring above is of Cluster.connect_sequencer:

Note

This method calls Module.connect_sequencer using functools.partial to set the sequencer index. The docstring above is of Module.connect_sequencer:

delete_acquisition_data(name: str = '', all: bool = False) → None

Delete data from an acquisition specified by name in the acquisition list of indexed sequencer or delete data in all acquisitions if all is True.

Parameters:: name (str) – Weight name
Raises:: NotImplementedError – Functionality not available on this module.

Note

This method calls Cluster.delete_acquisition_data using functools.partial to set the slot index. The docstring above is of Cluster.delete_acquisition_data:

Note

This method calls Module.delete_acquisition_data using functools.partial to set the sequencer index. The docstring above is of Module.delete_acquisition_data:

delete_dummy_binned_acquisition_data(acq_index_name: str | None = None)

Delete all dummy binned acquisition data for the dummy.

Parameters:: acq_index_name (Optional[str]) – Acquisition index name.

Note

This method calls Cluster.delete_dummy_binned_acquisition_data using functools.partial to set the slot index. The docstring above is of Cluster.delete_dummy_binned_acquisition_data:

Note

This method calls Module.delete_dummy_binned_acquisition_data using functools.partial to set the sequencer index. The docstring above is of Module.delete_dummy_binned_acquisition_data:

delete_dummy_scope_acquisition_data(): Delete dummy scope acquisition data for the dummy.

Note

This method calls Cluster.delete_dummy_scope_acquisition_data using functools.partial to set the slot index. The docstring above is of Cluster.delete_dummy_scope_acquisition_data:

Note

This method calls Module.delete_dummy_scope_acquisition_data using functools.partial to set the sequencer index. The docstring above is of Module.delete_dummy_scope_acquisition_data:

get_acquisition_state(timeout: int = 0, timeout_poll_res: float = 0.02) → bool

Return acquisition binning completion state of the indexed sequencer. If an invalid sequencer is given, an error is set in system error. If the timeout is set to zero, the function returns the state immediately. If a positive non-zero timeout is set, the function blocks until the acquisition binning completes. If the acquisition hasn’t completed before the timeout expires, a TimeoutError is thrown. Note that when sequencer state checking is enabled, the sequencer state is checked using get_sequencer_state with the selected timeout period first and then the acquisition state is checked with the same timeout period. This means that the total timeout period is two times the set timeout period.

Parameters:

timeout (int) – Timeout in minutes.
timeout_poll_res (float) – Timeout polling resolution in seconds.
check_seq_state (bool) – Check if sequencer is done before checking acquisition state.

Returns:

Indicates the acquisition binning completion state (False = uncompleted, True = completed).

Return type:

bool

Raises:

TimeoutError – Timeout
NotImplementedError – Functionality not available on this module.

Note

This method calls Cluster.get_acquisition_state using functools.partial to set the slot index. The docstring above is of Cluster.get_acquisition_state:

Note

This method calls Module.get_acquisition_state using functools.partial to set the sequencer index. The docstring above is of Module.get_acquisition_state:

get_acquisition_status(timeout: int = 0, timeout_poll_res: float = 0.02) → bool

Return acquisition binning completion status of the indexed sequencer. If an invalid sequencer is given, an error is set in system error. If the timeout is set to zero, the function returns the status immediately. If a positive non-zero timeout is set, the function blocks until the acquisition binning completes. If the acquisition hasn’t completed before the timeout expires, a TimeoutError is thrown. Note that when sequencer state checking is enabled, the sequencer state is checked using get_sequencer_status with the selected timeout period first and then the acquisition status is checked with the same timeout period. This means that the total timeout period is two times the set timeout period.

Parameters:

timeout (int) – Timeout in minutes.
timeout_poll_res (float) – Timeout polling resolution in seconds.
check_seq_state (bool) – Check if sequencer is done before checking acquisition status.

Returns:

Indicates the acquisition binning completion status (False = uncompleted, True = completed).

Return type:

bool

Raises:

TimeoutError – Timeout
NotImplementedError – Functionality not available on this module.

Note

This method calls Cluster.get_acquisition_status using functools.partial to set the slot index. The docstring above is of Cluster.get_acquisition_status:

Note

This method calls Module.get_acquisition_status using functools.partial to set the sequencer index. The docstring above is of Module.get_acquisition_status:

get_acquisitions() → Dict

Get all acquisitions in acquisition lists of indexed sequencer. The acquisition scope and bin data is normalized to a range of -1.0 to 1.0 taking both the bit widths of the processing path and average count into considaration. For the binned integration results, the integration length is not handled during normalization and therefore these values have to be divided by their respective integration lenghts. The returned dictionary is structured as follows:

name: acquisition name
- index: acquisition index used by the sequencer Q1ASM program to refer to the acquisition.
- acquisition: acquisition dictionary
  scope: Scope data
  
  path0: input path 0
  
  data: acquisition samples in a range of 1.0 to -1.0.
  
  out-of-range: out-of-range indication for the entire acquisition (False = in-range, True = out-of-range).
  
  avg_cnt: number of averages.
  
  path1: input path 1
  
  data: acquisition samples in a range of 1.0 to -1.0.
  
  out-of-range: out-of-range indication for the entire acquisition (False = in-range, True = out-of-range).
  
  avg_cnt: number of averages.
  
  bins: bin data
  
  integration: integration data
  
  path_0: input path 0 integration result bin list
  
  path_1: input path 1 integration result bin list
  
  threshold: threshold result bin list
  
  valid: list of valid indications per bin
  
  avg_cnt: list of number of averages per bin

Returns:: Dictionary with acquisitions.
Return type:: dict
Raises:: NotImplementedError – Functionality not available on this module.

Note

This method calls Cluster.get_acquisitions using functools.partial to set the slot index. The docstring above is of Cluster.get_acquisitions:

Note

This method calls Module.get_acquisitions using functools.partial to set the sequencer index. The docstring above is of Module.get_acquisitions:

get_sequencer_state(timeout: int = 0, timeout_poll_res: float = 0.02) → qblox_instruments.native.generic_func.SequencerState

Get the sequencer state. If an invalid sequencer index is given, an error is set in system error. If the timeout is set to zero, the function returns the state immediately. If a positive non-zero timeout is set, the function blocks until the sequencer completes. If the sequencer hasn’t stopped before the timeout expires, a TimeoutError is thrown.

Parameters:

timeout (int) – Timeout in minutes.
timeout_poll_res (float) – Timeout polling resolution in seconds.

Returns:

Tuple containing sequencer status and corresponding flags.

Return type:

SequencerState

Raises:

TimeoutError – Timeout

Note

This method calls Cluster.get_sequencer_state using functools.partial to set the slot index. The docstring above is of Cluster.get_sequencer_state:

Note

This method calls Module.get_sequencer_state using functools.partial to set the sequencer index. The docstring above is of Module.get_sequencer_state:

get_sequencer_status(timeout: int = 0, timeout_poll_res: float = 0.02) → qblox_instruments.native.generic_func.SequencerStatus

Get the sequencer status. If an invalid sequencer index is given, an error is set in system error. If the timeout is set to zero, the function returns the state immediately. If a positive non-zero timeout is set, the function blocks until the sequencer completes. If the sequencer hasn’t stopped before the timeout expires, a TimeoutError is thrown.

Parameters:

timeout (int) – Timeout in minutes.
timeout_poll_res (float) – Timeout polling resolution in seconds.

Returns:

Tuple containing sequencer status and corresponding flags.

Return type:

SequencerState

Raises:

TimeoutError – Timeout

Note

This method calls Cluster.get_sequencer_status using functools.partial to set the slot index. The docstring above is of Cluster.get_sequencer_status:

Note

This method calls Module.get_sequencer_status using functools.partial to set the sequencer index. The docstring above is of Module.get_sequencer_status:

get_trigger_thresholding(address: int) → Tuple#

Gets threshold for designated trigger address counter, together with the inversion condition. Thresholding condition used: greater than or equal.

Parameters:

address (int) – Trigger address to which the settings are applied

Returns:

int – Threshold
bool – Comparison result inversion

Raises:

NotImplementedError – Functionality not available on this module.

get_waveforms() → Dict

Get all waveforms and weigths in the AWG waveform list of indexed sequencer. The returned dictionary is structured as follows:

name: waveform name.
- data: waveform samples in a range of 1.0 to -1.0.
- index: waveform index used by the sequencer Q1ASM program to refer
  to the waveform.

Returns:: Dictionary with waveforms.
Return type:: dict

Note

This method calls Cluster.get_waveforms using functools.partial to set the slot index. The docstring above is of Cluster.get_waveforms:

Note

This method calls Module.get_waveforms using functools.partial to set the sequencer index. The docstring above is of Module.get_waveforms:

get_weights() → Dict

Get all weigths in the acquisition weight lists of indexed sequencer. The returned dictionary is structured as follows:

-name : weight name.

data: weight samples in a range of 1.0 to -1.0.

index: weight index used by the sequencer Q1ASM program to refer
to the weight.

Returns:: Dictionary with weights.
Return type:: dict
Raises:: NotImplementedError – Functionality not available on this module.

Note

This method calls Cluster.get_weights using functools.partial to set the slot index. The docstring above is of Cluster.get_weights:

Note

This method calls Module.get_weights using functools.partial to set the sequencer index. The docstring above is of Module.get_weights:

reset_trigger_thresholding() → None#

Resets trigger thresholds for all trigger address counters (T1 to T15) back to 0. Also resets inversion back to false.

Raises:: NotImplementedError – Functionality not available on this module.

property seq_idx(self) → int#

Get sequencer index.

Returns:: Sequencer index
Return type:: int

set_dummy_binned_acquisition_data(acq_index_name: str, data: Iterable[qblox_instruments.ieee488_2.dummy_transport.DummyBinnedAcquisitionData | None])

Set dummy binned acquisition data for the dummy.

Parameters:

acq_index_name (str) – Acquisition index name.
data (Iterable[Union[DummyBinnedAcquisitionData, None]]) – Dummy data for the binned acquisition. An iterable of all the bin values.

Note

This method calls Cluster.set_dummy_binned_acquisition_data using functools.partial to set the slot index. The docstring above is of Cluster.set_dummy_binned_acquisition_data:

Note

This method calls Module.set_dummy_binned_acquisition_data using functools.partial to set the sequencer index. The docstring above is of Module.set_dummy_binned_acquisition_data:

set_dummy_scope_acquisition_data(data: qblox_instruments.ieee488_2.dummy_transport.DummyScopeAcquisitionData)

Set dummy scope acquisition data for the dummy.

Parameters:: data (DummyScopeAcquisitionData) – Dummy data for the scope acquisition.

Note

This method calls Cluster.set_dummy_scope_acquisition_data using functools.partial to set the slot index. The docstring above is of Cluster.set_dummy_scope_acquisition_data:

Note

This method calls Module.set_dummy_scope_acquisition_data using functools.partial to set the sequencer index. The docstring above is of Module.set_dummy_scope_acquisition_data:

set_trigger_thresholding(address: int, count: int, invert: bool) → None#

Sets threshold for designated trigger address counter, together with the inversion condition. Thresholding condition used: greater than or equal.

Parameters:

address (int) – Trigger address to which the settings are applied
count (int) – Threshold
invert (bool) – Comparison result inversion

Raises:

NotImplementedError – Functionality not available on this module.

start_sequencer() → None

Start the indexed sequencer, thereby putting it in the running state. If an invalid sequencer index is given or the indexed sequencer was not yet armed, an error is set in system error. If no sequencer index is given, all armed sequencers are started and any sequencer not in the armed state is ignored. However, if no sequencer index is given and no sequencers are armed, and error is set in system error.

Raises:: RuntimeError – An error is reported in system error and debug <= 1. All errors are read from system error and listed in the exception.

Note

This method calls Cluster.start_sequencer using functools.partial to set the slot index. The docstring above is of Cluster.start_sequencer:

Note

This method calls Module.start_sequencer using functools.partial to set the sequencer index. The docstring above is of Module.start_sequencer:

stop_sequencer() → None

Stop the indexed sequencer, thereby putting it in the stopped state. If an invalid sequencer index is given, an error is set in system error. If no sequencer index is given, all sequencers are stopped.

Raises:: RuntimeError – An error is reported in system error and debug <= 1. All errors are read from system error and listed in the exception.

Note

This method calls Cluster.stop_sequencer using functools.partial to set the slot index. The docstring above is of Cluster.stop_sequencer:

Note

This method calls Module.stop_sequencer using functools.partial to set the sequencer index. The docstring above is of Module.stop_sequencer:

store_scope_acquisition(name: str) → None

After an acquisition has completed, store the scope acquisition results in the acquisition specified by name of the indexed sequencers. If an invalid sequencer index is given an error is set in system error. To get access to the acquisition results, the sequencer will be stopped when calling this function.

Parameters:: name (str) – Acquisition name.
Raises:: NotImplementedError – Functionality not available on this module.

Note

This method calls Cluster.store_scope_acquisition using functools.partial to set the slot index. The docstring above is of Cluster.store_scope_acquisition:

Note

This method calls Module.store_scope_acquisition using functools.partial to set the sequencer index. The docstring above is of Module.store_scope_acquisition:

Cluster QCM-RF parameters#

Sequencer.connect_out0()

Sets/gets whether this sequencer is connected to output 0, and if so which component.

Properties:

value: Enum: {False, True, ‘off’, ‘IQ’}

Sequencer.connect_out1()

Sets/gets whether this sequencer is connected to output 1, and if so which component.

Properties:

value: Enum: {False, True, ‘off’, ‘IQ’}

Sequencer.sync_en()

Sets/gets sequencer synchronization enable which enables party-line synchronization.

Properties:

value: Boolean

Sequencer.nco_freq()

Sets/gets sequencer NCO frequency in Hz with a resolution of 0.25 Hz. Be aware that the outputs have low-pass filters with a cut-off frequency of 300 MHz

Properties:

unit: Hz
value: Numbers -500000000.0<=v<=500000000.0

Sequencer.nco_phase_offs()

Sets/gets sequencer NCO phase offset in degrees with a resolution of 3.6e-7 degrees.

Properties:

unit: Degrees
value: Numbers 0<=v<=360

Sequencer.nco_prop_delay_comp()

Properties:

unit: ns
value: Numbers -50<=v<=50

Sequencer.nco_prop_delay_comp_en()

Properties:

unit: ns
value: Boolean

Sequencer.marker_ovr_en()

Sets/gets sequencer marker override enable.

Properties:

value: Boolean

Sequencer.marker_ovr_value()

Sets/gets sequencer marker override value. Bit index corresponds to marker channel index.

Properties:

value: Numbers 0<=v<=15

Sequencer.sequence()

Sets sequencer’s AWG waveforms, acquistion weights, acquisitions and Q1ASM program. Valid input is a string representing the JSON filename or a JSON compatible dictionary.

Properties:

value: MultiType: Strings, Dict

Sequencer.trigger1_count_threshold()

Sets/gets threshold for counter on trigger address T1. Thresholding condition used: greater than or equal.

Properties:

value: Numbers 0<=v<=65535

Sequencer.trigger1_threshold_invert()

Sets/gets comparison result inversion for triggeraddress 1.

Properties:

value: Boolean

Sequencer.trigger2_count_threshold()

Sets/gets threshold for counter on trigger address T2. Thresholding condition used: greater than or equal.

Properties:

value: Numbers 0<=v<=65535

Sequencer.trigger2_threshold_invert()

Sets/gets comparison result inversion for triggeraddress 2.

Properties:

value: Boolean

Sequencer.trigger3_count_threshold()

Sets/gets threshold for counter on trigger address T3. Thresholding condition used: greater than or equal.

Properties:

value: Numbers 0<=v<=65535

Sequencer.trigger3_threshold_invert()

Sets/gets comparison result inversion for triggeraddress 3.

Properties:

value: Boolean

Sequencer.trigger4_count_threshold()

Sets/gets threshold for counter on trigger address T4. Thresholding condition used: greater than or equal.

Properties:

value: Numbers 0<=v<=65535

Sequencer.trigger4_threshold_invert()

Sets/gets comparison result inversion for triggeraddress 4.

Properties:

value: Boolean

Sequencer.trigger5_count_threshold()

Sets/gets threshold for counter on trigger address T5. Thresholding condition used: greater than or equal.

Properties:

value: Numbers 0<=v<=65535

Sequencer.trigger5_threshold_invert()

Sets/gets comparison result inversion for triggeraddress 5.

Properties:

value: Boolean

Sequencer.trigger6_count_threshold()

Sets/gets threshold for counter on trigger address T6. Thresholding condition used: greater than or equal.

Properties:

value: Numbers 0<=v<=65535

Sequencer.trigger6_threshold_invert()

Sets/gets comparison result inversion for triggeraddress 6.

Properties:

value: Boolean

Sequencer.trigger7_count_threshold()

Sets/gets threshold for counter on trigger address T7. Thresholding condition used: greater than or equal.

Properties:

value: Numbers 0<=v<=65535

Sequencer.trigger7_threshold_invert()

Sets/gets comparison result inversion for triggeraddress 7.

Properties:

value: Boolean

Sequencer.trigger8_count_threshold()

Sets/gets threshold for counter on trigger address T8. Thresholding condition used: greater than or equal.

Properties:

value: Numbers 0<=v<=65535

Sequencer.trigger8_threshold_invert()

Sets/gets comparison result inversion for triggeraddress 8.

Properties:

value: Boolean

Sequencer.trigger9_count_threshold()

Sets/gets threshold for counter on trigger address T9. Thresholding condition used: greater than or equal.

Properties:

value: Numbers 0<=v<=65535

Sequencer.trigger9_threshold_invert()

Sets/gets comparison result inversion for triggeraddress 9.

Properties:

value: Boolean

Sequencer.trigger10_count_threshold()

Sets/gets threshold for counter on trigger address T10. Thresholding condition used: greater than or equal.

Properties:

value: Numbers 0<=v<=65535

Sequencer.trigger10_threshold_invert()

Sets/gets comparison result inversion for triggeraddress 10.

Properties:

value: Boolean

Sequencer.trigger11_count_threshold()

Sets/gets threshold for counter on trigger address T11. Thresholding condition used: greater than or equal.

Properties:

value: Numbers 0<=v<=65535

Sequencer.trigger11_threshold_invert()

Sets/gets comparison result inversion for triggeraddress 11.

Properties:

value: Boolean

Sequencer.trigger12_count_threshold()

Sets/gets threshold for counter on trigger address T12. Thresholding condition used: greater than or equal.

Properties:

value: Numbers 0<=v<=65535

Sequencer.trigger12_threshold_invert()

Sets/gets comparison result inversion for triggeraddress 12.

Properties:

value: Boolean

Sequencer.trigger13_count_threshold()

Sets/gets threshold for counter on trigger address T13. Thresholding condition used: greater than or equal.

Properties:

value: Numbers 0<=v<=65535

Sequencer.trigger13_threshold_invert()

Sets/gets comparison result inversion for triggeraddress 13.

Properties:

value: Boolean

Sequencer.trigger14_count_threshold()

Sets/gets threshold for counter on trigger address T14. Thresholding condition used: greater than or equal.

Properties:

value: Numbers 0<=v<=65535

Sequencer.trigger14_threshold_invert()

Sets/gets comparison result inversion for triggeraddress 14.

Properties:

value: Boolean

Sequencer.trigger15_count_threshold()

Sets/gets threshold for counter on trigger address T15. Thresholding condition used: greater than or equal.

Properties:

value: Numbers 0<=v<=65535

Sequencer.trigger15_threshold_invert()

Sets/gets comparison result inversion for triggeraddress 15.

Properties:

value: Boolean

Sequencer.cont_mode_en_awg_path0()

Sets/gets sequencer continous waveform mode enable for AWG path 0.

Properties:

value: Boolean

Sequencer.cont_mode_waveform_idx_awg_path0()

Sets/gets sequencer continous waveform mode waveform index or AWG path 0.

Properties:

value: Numbers 0<=v<=1023

Sequencer.upsample_rate_awg_path0()

Sets/gets sequencer upsample rate for AWG path 0.

Properties:

value: Numbers 0<=v<=65535

Sequencer.gain_awg_path0()

Sets/gets sequencer gain for AWG path 0.

Properties:

value: Numbers -1.0<=v<=1.0

Sequencer.offset_awg_path0()

Sets/gets sequencer offset for AWG path 0.

Properties:

value: Numbers -1.0<=v<=1.0

Sequencer.cont_mode_en_awg_path1()

Sets/gets sequencer continous waveform mode enable for AWG path 1.

Properties:

value: Boolean

Sequencer.cont_mode_waveform_idx_awg_path1()

Sets/gets sequencer continous waveform mode waveform index or AWG path 1.

Properties:

value: Numbers 0<=v<=1023

Sequencer.upsample_rate_awg_path1()

Sets/gets sequencer upsample rate for AWG path 1.

Properties:

value: Numbers 0<=v<=65535

Sequencer.gain_awg_path1()

Sets/gets sequencer gain for AWG path 0.

Properties:

value: Numbers -1.0<=v<=1.0

Sequencer.offset_awg_path1()

Sets/gets sequencer offset for AWG path 1.

Properties:

value: Numbers -1.0<=v<=1.0

Sequencer.mixer_corr_phase_offset_degree()

Sets/gets sequencer mixer phase imbalance correction for AWG; applied to AWG path 1 relative to AWG path 0 and measured in degrees

Properties:

value: Numbers -45.0<=v<=45.0

Sequencer.mixer_corr_gain_ratio()

Sets/gets sequencer mixer gain imbalance correction for AWG; equal to AWG path 1 amplitude divided by AWG path 0 amplitude.

Properties:

value: Numbers 0.5<=v<=2.0

Sequencer.mod_en_awg()

Sets/gets sequencer modulation enable for AWG.

Properties:

value: Boolean

arm_sequencer() → None

Raises:: RuntimeError – An error is reported in system error and debug <= 1. All errors are read from system error and listed in the exception.

Note

This method calls Cluster.arm_sequencer using functools.partial to set the slot index. The docstring above is of Cluster.arm_sequencer:

Note

This method calls Module.arm_sequencer using functools.partial to set the sequencer index. The docstring above is of Module.arm_sequencer:

clear_sequencer_flags() → None: Clear flags

Note

This method calls Cluster.clear_sequencer_flags using functools.partial to set the slot index. The docstring above is of Cluster.clear_sequencer_flags:

Note

This method calls Module.clear_sequencer_flags using functools.partial to set the sequencer index. The docstring above is of Module.clear_sequencer_flags:

connect_sequencer(*connections: str) → None

Parameters:

Raises:

RuntimeError – If the connection command could not be completed due to a conflict.
ValueError – If parsing of a connection fails.

Note

This method calls Cluster.connect_sequencer using functools.partial to set the slot index. The docstring above is of Cluster.connect_sequencer:

Note

This method calls Module.connect_sequencer using functools.partial to set the sequencer index. The docstring above is of Module.connect_sequencer:

delete_acquisition_data(name: str = '', all: bool = False) → None

Delete data from an acquisition specified by name in the acquisition list of indexed sequencer or delete data in all acquisitions if all is True.

Parameters:: name (str) – Weight name
Raises:: NotImplementedError – Functionality not available on this module.

Note

This method calls Cluster.delete_acquisition_data using functools.partial to set the slot index. The docstring above is of Cluster.delete_acquisition_data:

Note

This method calls Module.delete_acquisition_data using functools.partial to set the sequencer index. The docstring above is of Module.delete_acquisition_data:

delete_dummy_binned_acquisition_data(acq_index_name: str | None = None)

Delete all dummy binned acquisition data for the dummy.

Parameters:: acq_index_name (Optional[str]) – Acquisition index name.

Note

This method calls Cluster.delete_dummy_binned_acquisition_data using functools.partial to set the slot index. The docstring above is of Cluster.delete_dummy_binned_acquisition_data:

Note

This method calls Module.delete_dummy_binned_acquisition_data using functools.partial to set the sequencer index. The docstring above is of Module.delete_dummy_binned_acquisition_data:

delete_dummy_scope_acquisition_data(): Delete dummy scope acquisition data for the dummy.

Note

This method calls Cluster.delete_dummy_scope_acquisition_data using functools.partial to set the slot index. The docstring above is of Cluster.delete_dummy_scope_acquisition_data:

Note

This method calls Module.delete_dummy_scope_acquisition_data using functools.partial to set the sequencer index. The docstring above is of Module.delete_dummy_scope_acquisition_data:

get_acquisition_state(timeout: int = 0, timeout_poll_res: float = 0.02) → bool

Parameters:

timeout (int) – Timeout in minutes.
timeout_poll_res (float) – Timeout polling resolution in seconds.
check_seq_state (bool) – Check if sequencer is done before checking acquisition state.

Returns:

Indicates the acquisition binning completion state (False = uncompleted, True = completed).

Return type:

bool

Raises:

TimeoutError – Timeout
NotImplementedError – Functionality not available on this module.

Note

This method calls Cluster.get_acquisition_state using functools.partial to set the slot index. The docstring above is of Cluster.get_acquisition_state:

Note

This method calls Module.get_acquisition_state using functools.partial to set the sequencer index. The docstring above is of Module.get_acquisition_state:

get_acquisition_status(timeout: int = 0, timeout_poll_res: float = 0.02) → bool

Parameters:

timeout (int) – Timeout in minutes.
timeout_poll_res (float) – Timeout polling resolution in seconds.
check_seq_state (bool) – Check if sequencer is done before checking acquisition status.

Returns:

Indicates the acquisition binning completion status (False = uncompleted, True = completed).

Return type:

bool

Raises:

TimeoutError – Timeout
NotImplementedError – Functionality not available on this module.

Note

This method calls Cluster.get_acquisition_status using functools.partial to set the slot index. The docstring above is of Cluster.get_acquisition_status:

Note

This method calls Module.get_acquisition_status using functools.partial to set the sequencer index. The docstring above is of Module.get_acquisition_status:

get_acquisitions() → Dict

name: acquisition name
- index: acquisition index used by the sequencer Q1ASM program to refer to the acquisition.
- acquisition: acquisition dictionary
  scope: Scope data
  
  path0: input path 0
  
  data: acquisition samples in a range of 1.0 to -1.0.
  
  out-of-range: out-of-range indication for the entire acquisition (False = in-range, True = out-of-range).
  
  avg_cnt: number of averages.
  
  path1: input path 1
  
  data: acquisition samples in a range of 1.0 to -1.0.
  
  out-of-range: out-of-range indication for the entire acquisition (False = in-range, True = out-of-range).
  
  avg_cnt: number of averages.
  
  bins: bin data
  
  integration: integration data
  
  path_0: input path 0 integration result bin list
  
  path_1: input path 1 integration result bin list
  
  threshold: threshold result bin list
  
  valid: list of valid indications per bin
  
  avg_cnt: list of number of averages per bin

Returns:: Dictionary with acquisitions.
Return type:: dict
Raises:: NotImplementedError – Functionality not available on this module.

Note

This method calls Cluster.get_acquisitions using functools.partial to set the slot index. The docstring above is of Cluster.get_acquisitions:

Note

This method calls Module.get_acquisitions using functools.partial to set the sequencer index. The docstring above is of Module.get_acquisitions:

get_sequencer_state(timeout: int = 0, timeout_poll_res: float = 0.02) → qblox_instruments.native.generic_func.SequencerState

Parameters:

timeout (int) – Timeout in minutes.
timeout_poll_res (float) – Timeout polling resolution in seconds.

Returns:

Tuple containing sequencer status and corresponding flags.

Return type:

SequencerState

Raises:

TimeoutError – Timeout

Note

This method calls Cluster.get_sequencer_state using functools.partial to set the slot index. The docstring above is of Cluster.get_sequencer_state:

Note

This method calls Module.get_sequencer_state using functools.partial to set the sequencer index. The docstring above is of Module.get_sequencer_state:

get_sequencer_status(timeout: int = 0, timeout_poll_res: float = 0.02) → qblox_instruments.native.generic_func.SequencerStatus

Parameters:

timeout (int) – Timeout in minutes.
timeout_poll_res (float) – Timeout polling resolution in seconds.

Returns:

Tuple containing sequencer status and corresponding flags.

Return type:

SequencerState

Raises:

TimeoutError – Timeout

Note

This method calls Cluster.get_sequencer_status using functools.partial to set the slot index. The docstring above is of Cluster.get_sequencer_status:

Note

This method calls Module.get_sequencer_status using functools.partial to set the sequencer index. The docstring above is of Module.get_sequencer_status:

get_trigger_thresholding(address: int) → Tuple

Gets threshold for designated trigger address counter, together with the inversion condition. Thresholding condition used: greater than or equal.

Parameters:

address (int) – Trigger address to which the settings are applied

Returns:

int – Threshold
bool – Comparison result inversion

Raises:

NotImplementedError – Functionality not available on this module.

get_waveforms() → Dict

Get all waveforms and weigths in the AWG waveform list of indexed sequencer. The returned dictionary is structured as follows:

name: waveform name.
- data: waveform samples in a range of 1.0 to -1.0.
- index: waveform index used by the sequencer Q1ASM program to refer
  to the waveform.

Returns:: Dictionary with waveforms.
Return type:: dict

Note

This method calls Cluster.get_waveforms using functools.partial to set the slot index. The docstring above is of Cluster.get_waveforms:

Note

This method calls Module.get_waveforms using functools.partial to set the sequencer index. The docstring above is of Module.get_waveforms:

get_weights() → Dict

Get all weigths in the acquisition weight lists of indexed sequencer. The returned dictionary is structured as follows:

-name : weight name.

data: weight samples in a range of 1.0 to -1.0.

index: weight index used by the sequencer Q1ASM program to refer
to the weight.

Returns:: Dictionary with weights.
Return type:: dict
Raises:: NotImplementedError – Functionality not available on this module.

Note

This method calls Cluster.get_weights using functools.partial to set the slot index. The docstring above is of Cluster.get_weights:

Note

This method calls Module.get_weights using functools.partial to set the sequencer index. The docstring above is of Module.get_weights:

reset_trigger_thresholding() → None

Resets trigger thresholds for all trigger address counters (T1 to T15) back to 0. Also resets inversion back to false.

Raises:: NotImplementedError – Functionality not available on this module.

property seq_idx(self) → int

Get sequencer index.

Returns:: Sequencer index
Return type:: int

set_dummy_binned_acquisition_data(acq_index_name: str, data: Iterable[qblox_instruments.ieee488_2.dummy_transport.DummyBinnedAcquisitionData | None])

Set dummy binned acquisition data for the dummy.

Parameters:

acq_index_name (str) – Acquisition index name.
data (Iterable[Union[DummyBinnedAcquisitionData, None]]) – Dummy data for the binned acquisition. An iterable of all the bin values.

Note

This method calls Cluster.set_dummy_binned_acquisition_data using functools.partial to set the slot index. The docstring above is of Cluster.set_dummy_binned_acquisition_data:

Note

This method calls Module.set_dummy_binned_acquisition_data using functools.partial to set the sequencer index. The docstring above is of Module.set_dummy_binned_acquisition_data:

set_dummy_scope_acquisition_data(data: qblox_instruments.ieee488_2.dummy_transport.DummyScopeAcquisitionData)

Set dummy scope acquisition data for the dummy.

Parameters:: data (DummyScopeAcquisitionData) – Dummy data for the scope acquisition.

Note

This method calls Cluster.set_dummy_scope_acquisition_data using functools.partial to set the slot index. The docstring above is of Cluster.set_dummy_scope_acquisition_data:

Note

This method calls Module.set_dummy_scope_acquisition_data using functools.partial to set the sequencer index. The docstring above is of Module.set_dummy_scope_acquisition_data:

set_trigger_thresholding(address: int, count: int, invert: bool) → None

Sets threshold for designated trigger address counter, together with the inversion condition. Thresholding condition used: greater than or equal.

Parameters:

address (int) – Trigger address to which the settings are applied
count (int) – Threshold
invert (bool) – Comparison result inversion

Raises:

NotImplementedError – Functionality not available on this module.

start_sequencer() → None

Raises:: RuntimeError – An error is reported in system error and debug <= 1. All errors are read from system error and listed in the exception.

Note

This method calls Cluster.start_sequencer using functools.partial to set the slot index. The docstring above is of Cluster.start_sequencer:

Note

This method calls Module.start_sequencer using functools.partial to set the sequencer index. The docstring above is of Module.start_sequencer:

stop_sequencer() → None

Raises:: RuntimeError – An error is reported in system error and debug <= 1. All errors are read from system error and listed in the exception.

Note

This method calls Cluster.stop_sequencer using functools.partial to set the slot index. The docstring above is of Cluster.stop_sequencer:

Note

This method calls Module.stop_sequencer using functools.partial to set the sequencer index. The docstring above is of Module.stop_sequencer:

store_scope_acquisition(name: str) → None

Parameters:: name (str) – Acquisition name.
Raises:: NotImplementedError – Functionality not available on this module.

Note

This method calls Cluster.store_scope_acquisition using functools.partial to set the slot index. The docstring above is of Cluster.store_scope_acquisition:

Note

This method calls Module.store_scope_acquisition using functools.partial to set the sequencer index. The docstring above is of Module.store_scope_acquisition:

Cluster QRM parameters#

Sequencer.connect_out0()

Sets/gets whether this sequencer is connected to output 0, and if so which component.

Properties:

value: Enum: {‘Q’, ‘off’, ‘I’}

Sequencer.connect_out1()

Sets/gets whether this sequencer is connected to output 1, and if so which component.

Properties:

value: Enum: {‘Q’, ‘off’, ‘I’}

Sequencer.connect_acq_I()#

Sets/gets which input the I input of the acquisition path of this sequencer is connected to, if any.

Properties:

value: Enum: {‘in1’, ‘off’, ‘in0’}

Sequencer.connect_acq_Q()#

Sets/gets which input the Q input of the acquisition path of this sequencer is connected to, if any.

Properties:

value: Enum: {‘in1’, ‘off’, ‘in0’}

Sequencer.sync_en()

Sets/gets sequencer synchronization enable which enables party-line synchronization.

Properties:

value: Boolean

Sequencer.nco_freq()

Sets/gets sequencer NCO frequency in Hz with a resolution of 0.25 Hz. Be aware that the outputs have low-pass filters with a cut-off frequency of 350 MHz

Properties:

unit: Hz
value: Numbers -500000000.0<=v<=500000000.0

Sequencer.nco_phase_offs()

Sets/gets sequencer NCO phase offset in degrees with a resolution of 3.6e-7 degrees.

Properties:

unit: Degrees
value: Numbers 0<=v<=360

Sequencer.nco_prop_delay_comp()

Properties:

unit: ns
value: Numbers -50<=v<=50

Sequencer.nco_prop_delay_comp_en()

Properties:

unit: ns
value: Boolean

Sequencer.marker_ovr_en()

Sets/gets sequencer marker override enable.

Properties:

value: Boolean

Sequencer.marker_ovr_value()

Sets/gets sequencer marker override value. Bit index corresponds to marker channel index.

Properties:

value: Numbers 0<=v<=15

Sequencer.sequence()

Sets sequencer’s AWG waveforms, acquistion weights, acquisitions and Q1ASM program. Valid input is a string representing the JSON filename or a JSON compatible dictionary.

Properties:

value: MultiType: Strings, Dict

Sequencer.trigger1_count_threshold()

Sets/gets threshold for counter on trigger address T1. Thresholding condition used: greater than or equal.

Properties:

value: Numbers 0<=v<=65535

Sequencer.trigger1_threshold_invert()

Sets/gets comparison result inversion for triggeraddress 1.

Properties:

value: Boolean

Sequencer.trigger2_count_threshold()

Sets/gets threshold for counter on trigger address T2. Thresholding condition used: greater than or equal.

Properties:

value: Numbers 0<=v<=65535

Sequencer.trigger2_threshold_invert()

Sets/gets comparison result inversion for triggeraddress 2.

Properties:

value: Boolean

Sequencer.trigger3_count_threshold()

Sets/gets threshold for counter on trigger address T3. Thresholding condition used: greater than or equal.

Properties:

value: Numbers 0<=v<=65535

Sequencer.trigger3_threshold_invert()

Sets/gets comparison result inversion for triggeraddress 3.

Properties:

value: Boolean

Sequencer.trigger4_count_threshold()

Sets/gets threshold for counter on trigger address T4. Thresholding condition used: greater than or equal.

Properties:

value: Numbers 0<=v<=65535

Sequencer.trigger4_threshold_invert()

Sets/gets comparison result inversion for triggeraddress 4.

Properties:

value: Boolean

Sequencer.trigger5_count_threshold()

Sets/gets threshold for counter on trigger address T5. Thresholding condition used: greater than or equal.

Properties:

value: Numbers 0<=v<=65535

Sequencer.trigger5_threshold_invert()

Sets/gets comparison result inversion for triggeraddress 5.

Properties:

value: Boolean

Sequencer.trigger6_count_threshold()

Sets/gets threshold for counter on trigger address T6. Thresholding condition used: greater than or equal.

Properties:

value: Numbers 0<=v<=65535

Sequencer.trigger6_threshold_invert()

Sets/gets comparison result inversion for triggeraddress 6.

Properties:

value: Boolean

Sequencer.trigger7_count_threshold()

Sets/gets threshold for counter on trigger address T7. Thresholding condition used: greater than or equal.

Properties:

value: Numbers 0<=v<=65535

Sequencer.trigger7_threshold_invert()

Sets/gets comparison result inversion for triggeraddress 7.

Properties:

value: Boolean

Sequencer.trigger8_count_threshold()

Sets/gets threshold for counter on trigger address T8. Thresholding condition used: greater than or equal.

Properties:

value: Numbers 0<=v<=65535

Sequencer.trigger8_threshold_invert()

Sets/gets comparison result inversion for triggeraddress 8.

Properties:

value: Boolean

Sequencer.trigger9_count_threshold()

Sets/gets threshold for counter on trigger address T9. Thresholding condition used: greater than or equal.

Properties:

value: Numbers 0<=v<=65535

Sequencer.trigger9_threshold_invert()

Sets/gets comparison result inversion for triggeraddress 9.

Properties:

value: Boolean

Sequencer.trigger10_count_threshold()

Sets/gets threshold for counter on trigger address T10. Thresholding condition used: greater than or equal.

Properties:

value: Numbers 0<=v<=65535

Sequencer.trigger10_threshold_invert()

Sets/gets comparison result inversion for triggeraddress 10.

Properties:

value: Boolean

Sequencer.trigger11_count_threshold()

Sets/gets threshold for counter on trigger address T11. Thresholding condition used: greater than or equal.

Properties:

value: Numbers 0<=v<=65535

Sequencer.trigger11_threshold_invert()

Sets/gets comparison result inversion for triggeraddress 11.

Properties:

value: Boolean

Sequencer.trigger12_count_threshold()

Sets/gets threshold for counter on trigger address T12. Thresholding condition used: greater than or equal.

Properties:

value: Numbers 0<=v<=65535

Sequencer.trigger12_threshold_invert()

Sets/gets comparison result inversion for triggeraddress 12.

Properties:

value: Boolean

Sequencer.trigger13_count_threshold()

Sets/gets threshold for counter on trigger address T13. Thresholding condition used: greater than or equal.

Properties:

value: Numbers 0<=v<=65535

Sequencer.trigger13_threshold_invert()

Sets/gets comparison result inversion for triggeraddress 13.

Properties:

value: Boolean

Sequencer.trigger14_count_threshold()

Sets/gets threshold for counter on trigger address T14. Thresholding condition used: greater than or equal.

Properties:

value: Numbers 0<=v<=65535

Sequencer.trigger14_threshold_invert()

Sets/gets comparison result inversion for triggeraddress 14.

Properties:

value: Boolean

Sequencer.trigger15_count_threshold()

Sets/gets threshold for counter on trigger address T15. Thresholding condition used: greater than or equal.

Properties:

value: Numbers 0<=v<=65535

Sequencer.trigger15_threshold_invert()

Sets/gets comparison result inversion for triggeraddress 15.

Properties:

value: Boolean

Sequencer.cont_mode_en_awg_path0()

Sets/gets sequencer continous waveform mode enable for AWG path 0.

Properties:

value: Boolean

Sequencer.cont_mode_waveform_idx_awg_path0()

Sets/gets sequencer continous waveform mode waveform index or AWG path 0.

Properties:

value: Numbers 0<=v<=1023

Sequencer.upsample_rate_awg_path0()

Sets/gets sequencer upsample rate for AWG path 0.

Properties:

value: Numbers 0<=v<=65535

Sequencer.gain_awg_path0()

Sets/gets sequencer gain for AWG path 0.

Properties:

value: Numbers -1.0<=v<=1.0

Sequencer.offset_awg_path0()

Sets/gets sequencer offset for AWG path 0.

Properties:

value: Numbers -1.0<=v<=1.0

Sequencer.cont_mode_en_awg_path1()

Sets/gets sequencer continous waveform mode enable for AWG path 1.

Properties:

value: Boolean

Sequencer.cont_mode_waveform_idx_awg_path1()

Sets/gets sequencer continous waveform mode waveform index or AWG path 1.

Properties:

value: Numbers 0<=v<=1023

Sequencer.upsample_rate_awg_path1()

Sets/gets sequencer upsample rate for AWG path 1.

Properties:

value: Numbers 0<=v<=65535

Sequencer.gain_awg_path1()

Sets/gets sequencer gain for AWG path 0.

Properties:

value: Numbers -1.0<=v<=1.0

Sequencer.offset_awg_path1()

Sets/gets sequencer offset for AWG path 1.

Properties:

value: Numbers -1.0<=v<=1.0

Sequencer.mixer_corr_phase_offset_degree()

Sets/gets sequencer mixer phase imbalance correction for AWG; applied to AWG path 1 relative to AWG path 0 and measured in degrees

Properties:

value: Numbers -45.0<=v<=45.0

Sequencer.mixer_corr_gain_ratio()

Sets/gets sequencer mixer gain imbalance correction for AWG; equal to AWG path 1 amplitude divided by AWG path 0 amplitude.

Properties:

value: Numbers 0.5<=v<=2.0

Sequencer.mod_en_awg()

Sets/gets sequencer modulation enable for AWG.

Properties:

value: Boolean

Sequencer.demod_en_acq()#

Sets/gets sequencer demodulation enable for acquisition.

Properties:

value: Boolean

Sequencer.integration_length_acq()#

Sets/gets sequencer integration length in number of samples for non-weighed acquisitions on paths 0 and 1. Must be a multiple of 4

Properties:

value: Numbers 4<=v<=16777212

Sequencer.thresholded_acq_rotation()#

Sets/gets sequencer integration result phase rotation in degrees.

Properties:

unit: Degrees
value: Numbers 0<=v<=360

Sequencer.thresholded_acq_threshold()#

Sets/gets sequencer discretization threshold for discretizing the phase rotation result. Discretization is done by comparing the threshold to the rotated integration result of path 0. This comparison is applied before normalization (i.e. division) of the rotated value with the integration length and therefore the threshold needs to be compensated (i.e. multiplied) with this length for the discretization to function properly.

Properties:

value: Numbers -16777212.0<=v<=16777212.0

Sequencer.thresholded_acq_marker_en()#

Enable mapping of thresholded acquisition result to markers.

Properties:

value: Boolean

Sequencer.thresholded_acq_marker_address()#

Sets/gets the marker mask which maps the thresholded acquisition result to the markers (M1 to M4).

Properties:

value: Numbers 0<=v<=15

Sequencer.thresholded_acq_marker_invert()#

Sets/gets inversion of the thresholded acquistion result before it is masked onto the markers.

Properties:

value: Boolean

Sequencer.thresholded_acq_trigger_en()#

Sets/gets mapping of thresholded acquisition result to trigger network.

Properties:

value: Boolean

Sequencer.thresholded_acq_trigger_address()#

Sets/gets the trigger address to which the thresholded acquisition result is mapped to the trigger network (T1 to T15)

Properties:

value: Numbers 1<=v<=15

Sequencer.thresholded_acq_trigger_invert()#

Sets/gets the inversion of the thresholded acquistion result before it is mapped to the trigger network.

Properties:

value: Boolean

Sequencer.ttl_acq_auto_bin_incr_en()#

Sets/gets whether the bin index is automatically incremented when acquiring multiple triggers. Disabling the TTL trigger acquisition path resets the bin index.

Properties:

value: Boolean

Sequencer.ttl_acq_threshold()#

Sets/gets the threshold value with which to compare the input ADC values of the selected input path.

Properties:

value: Numbers -1.0<=v<=1.0

Sequencer.ttl_acq_input_select()#

Sets/gets the input used to compare against the threshold value in the TTL trigger acquisition path.

Properties:

value: Numbers 0<=v<=1

arm_sequencer() → None

Raises:: RuntimeError – An error is reported in system error and debug <= 1. All errors are read from system error and listed in the exception.

Note

This method calls Cluster.arm_sequencer using functools.partial to set the slot index. The docstring above is of Cluster.arm_sequencer:

Note

This method calls Module.arm_sequencer using functools.partial to set the sequencer index. The docstring above is of Module.arm_sequencer:

clear_sequencer_flags() → None: Clear flags

Note

This method calls Cluster.clear_sequencer_flags using functools.partial to set the slot index. The docstring above is of Cluster.clear_sequencer_flags:

Note

This method calls Module.clear_sequencer_flags using functools.partial to set the sequencer index. The docstring above is of Module.clear_sequencer_flags:

connect_sequencer(*connections: str) → None

Parameters:

Raises:

RuntimeError – If the connection command could not be completed due to a conflict.
ValueError – If parsing of a connection fails.

Note

This method calls Cluster.connect_sequencer using functools.partial to set the slot index. The docstring above is of Cluster.connect_sequencer:

Note

This method calls Module.connect_sequencer using functools.partial to set the sequencer index. The docstring above is of Module.connect_sequencer:

delete_acquisition_data(name: str = '', all: bool = False) → None

Delete data from an acquisition specified by name in the acquisition list of indexed sequencer or delete data in all acquisitions if all is True.

Parameters:: name (str) – Weight name
Raises:: NotImplementedError – Functionality not available on this module.

Note

This method calls Cluster.delete_acquisition_data using functools.partial to set the slot index. The docstring above is of Cluster.delete_acquisition_data:

Note

This method calls Module.delete_acquisition_data using functools.partial to set the sequencer index. The docstring above is of Module.delete_acquisition_data:

delete_dummy_binned_acquisition_data(acq_index_name: str | None = None)

Delete all dummy binned acquisition data for the dummy.

Parameters:: acq_index_name (Optional[str]) – Acquisition index name.

Note

This method calls Cluster.delete_dummy_binned_acquisition_data using functools.partial to set the slot index. The docstring above is of Cluster.delete_dummy_binned_acquisition_data:

Note

This method calls Module.delete_dummy_binned_acquisition_data using functools.partial to set the sequencer index. The docstring above is of Module.delete_dummy_binned_acquisition_data:

delete_dummy_scope_acquisition_data(): Delete dummy scope acquisition data for the dummy.

Note

This method calls Cluster.delete_dummy_scope_acquisition_data using functools.partial to set the slot index. The docstring above is of Cluster.delete_dummy_scope_acquisition_data:

Note

This method calls Module.delete_dummy_scope_acquisition_data using functools.partial to set the sequencer index. The docstring above is of Module.delete_dummy_scope_acquisition_data:

get_acquisition_state(timeout: int = 0, timeout_poll_res: float = 0.02) → bool

Parameters:

timeout (int) – Timeout in minutes.
timeout_poll_res (float) – Timeout polling resolution in seconds.
check_seq_state (bool) – Check if sequencer is done before checking acquisition state.

Returns:

Indicates the acquisition binning completion state (False = uncompleted, True = completed).

Return type:

bool

Raises:

TimeoutError – Timeout
NotImplementedError – Functionality not available on this module.

Note

This method calls Cluster.get_acquisition_state using functools.partial to set the slot index. The docstring above is of Cluster.get_acquisition_state:

Note

This method calls Module.get_acquisition_state using functools.partial to set the sequencer index. The docstring above is of Module.get_acquisition_state:

get_acquisition_status(timeout: int = 0, timeout_poll_res: float = 0.02) → bool

Parameters:

timeout (int) – Timeout in minutes.
timeout_poll_res (float) – Timeout polling resolution in seconds.
check_seq_state (bool) – Check if sequencer is done before checking acquisition status.

Returns:

Indicates the acquisition binning completion status (False = uncompleted, True = completed).

Return type:

bool

Raises:

TimeoutError – Timeout
NotImplementedError – Functionality not available on this module.

Note

This method calls Cluster.get_acquisition_status using functools.partial to set the slot index. The docstring above is of Cluster.get_acquisition_status:

Note

This method calls Module.get_acquisition_status using functools.partial to set the sequencer index. The docstring above is of Module.get_acquisition_status:

get_acquisitions() → Dict

name: acquisition name
- index: acquisition index used by the sequencer Q1ASM program to refer to the acquisition.
- acquisition: acquisition dictionary
  scope: Scope data
  
  path0: input path 0
  
  data: acquisition samples in a range of 1.0 to -1.0.
  
  out-of-range: out-of-range indication for the entire acquisition (False = in-range, True = out-of-range).
  
  avg_cnt: number of averages.
  
  path1: input path 1
  
  data: acquisition samples in a range of 1.0 to -1.0.
  
  out-of-range: out-of-range indication for the entire acquisition (False = in-range, True = out-of-range).
  
  avg_cnt: number of averages.
  
  bins: bin data
  
  integration: integration data
  
  path_0: input path 0 integration result bin list
  
  path_1: input path 1 integration result bin list
  
  threshold: threshold result bin list
  
  valid: list of valid indications per bin
  
  avg_cnt: list of number of averages per bin

Returns:: Dictionary with acquisitions.
Return type:: dict
Raises:: NotImplementedError – Functionality not available on this module.

Note

This method calls Cluster.get_acquisitions using functools.partial to set the slot index. The docstring above is of Cluster.get_acquisitions:

Note

This method calls Module.get_acquisitions using functools.partial to set the sequencer index. The docstring above is of Module.get_acquisitions:

get_sequencer_state(timeout: int = 0, timeout_poll_res: float = 0.02) → qblox_instruments.native.generic_func.SequencerState

Parameters:

timeout (int) – Timeout in minutes.
timeout_poll_res (float) – Timeout polling resolution in seconds.

Returns:

Tuple containing sequencer status and corresponding flags.

Return type:

SequencerState

Raises:

TimeoutError – Timeout

Note

This method calls Cluster.get_sequencer_state using functools.partial to set the slot index. The docstring above is of Cluster.get_sequencer_state:

Note

This method calls Module.get_sequencer_state using functools.partial to set the sequencer index. The docstring above is of Module.get_sequencer_state:

get_sequencer_status(timeout: int = 0, timeout_poll_res: float = 0.02) → qblox_instruments.native.generic_func.SequencerStatus

Parameters:

timeout (int) – Timeout in minutes.
timeout_poll_res (float) – Timeout polling resolution in seconds.

Returns:

Tuple containing sequencer status and corresponding flags.

Return type:

SequencerState

Raises:

TimeoutError – Timeout

Note

This method calls Cluster.get_sequencer_status using functools.partial to set the slot index. The docstring above is of Cluster.get_sequencer_status:

Note

This method calls Module.get_sequencer_status using functools.partial to set the sequencer index. The docstring above is of Module.get_sequencer_status:

get_trigger_thresholding(address: int) → Tuple

Gets threshold for designated trigger address counter, together with the inversion condition. Thresholding condition used: greater than or equal.

Parameters:

address (int) – Trigger address to which the settings are applied

Returns:

int – Threshold
bool – Comparison result inversion

Raises:

NotImplementedError – Functionality not available on this module.

get_waveforms() → Dict

Get all waveforms and weigths in the AWG waveform list of indexed sequencer. The returned dictionary is structured as follows:

name: waveform name.
- data: waveform samples in a range of 1.0 to -1.0.
- index: waveform index used by the sequencer Q1ASM program to refer
  to the waveform.

Returns:: Dictionary with waveforms.
Return type:: dict

Note

This method calls Cluster.get_waveforms using functools.partial to set the slot index. The docstring above is of Cluster.get_waveforms:

Note

This method calls Module.get_waveforms using functools.partial to set the sequencer index. The docstring above is of Module.get_waveforms:

get_weights() → Dict

Get all weigths in the acquisition weight lists of indexed sequencer. The returned dictionary is structured as follows:

-name : weight name.

data: weight samples in a range of 1.0 to -1.0.

index: weight index used by the sequencer Q1ASM program to refer
to the weight.

Returns:: Dictionary with weights.
Return type:: dict
Raises:: NotImplementedError – Functionality not available on this module.

Note

This method calls Cluster.get_weights using functools.partial to set the slot index. The docstring above is of Cluster.get_weights:

Note

This method calls Module.get_weights using functools.partial to set the sequencer index. The docstring above is of Module.get_weights:

reset_trigger_thresholding() → None

Resets trigger thresholds for all trigger address counters (T1 to T15) back to 0. Also resets inversion back to false.

Raises:: NotImplementedError – Functionality not available on this module.

property seq_idx(self) → int

Get sequencer index.

Returns:: Sequencer index
Return type:: int

set_dummy_binned_acquisition_data(acq_index_name: str, data: Iterable[qblox_instruments.ieee488_2.dummy_transport.DummyBinnedAcquisitionData | None])

Set dummy binned acquisition data for the dummy.

Parameters:

acq_index_name (str) – Acquisition index name.
data (Iterable[Union[DummyBinnedAcquisitionData, None]]) – Dummy data for the binned acquisition. An iterable of all the bin values.

Note

This method calls Cluster.set_dummy_binned_acquisition_data using functools.partial to set the slot index. The docstring above is of Cluster.set_dummy_binned_acquisition_data:

Note

This method calls Module.set_dummy_binned_acquisition_data using functools.partial to set the sequencer index. The docstring above is of Module.set_dummy_binned_acquisition_data:

set_dummy_scope_acquisition_data(data: qblox_instruments.ieee488_2.dummy_transport.DummyScopeAcquisitionData)

Set dummy scope acquisition data for the dummy.

Parameters:: data (DummyScopeAcquisitionData) – Dummy data for the scope acquisition.

Note

This method calls Cluster.set_dummy_scope_acquisition_data using functools.partial to set the slot index. The docstring above is of Cluster.set_dummy_scope_acquisition_data:

Note

This method calls Module.set_dummy_scope_acquisition_data using functools.partial to set the sequencer index. The docstring above is of Module.set_dummy_scope_acquisition_data:

set_trigger_thresholding(address: int, count: int, invert: bool) → None

Sets threshold for designated trigger address counter, together with the inversion condition. Thresholding condition used: greater than or equal.

Parameters:

address (int) – Trigger address to which the settings are applied
count (int) – Threshold
invert (bool) – Comparison result inversion

Raises:

NotImplementedError – Functionality not available on this module.

start_sequencer() → None

Raises:: RuntimeError – An error is reported in system error and debug <= 1. All errors are read from system error and listed in the exception.

Note

This method calls Cluster.start_sequencer using functools.partial to set the slot index. The docstring above is of Cluster.start_sequencer:

Note

This method calls Module.start_sequencer using functools.partial to set the sequencer index. The docstring above is of Module.start_sequencer:

stop_sequencer() → None

Raises:: RuntimeError – An error is reported in system error and debug <= 1. All errors are read from system error and listed in the exception.

Note

This method calls Cluster.stop_sequencer using functools.partial to set the slot index. The docstring above is of Cluster.stop_sequencer:

Note

This method calls Module.stop_sequencer using functools.partial to set the sequencer index. The docstring above is of Module.stop_sequencer:

store_scope_acquisition(name: str) → None

Parameters:: name (str) – Acquisition name.
Raises:: NotImplementedError – Functionality not available on this module.

Note

This method calls Cluster.store_scope_acquisition using functools.partial to set the slot index. The docstring above is of Cluster.store_scope_acquisition:

Note

This method calls Module.store_scope_acquisition using functools.partial to set the sequencer index. The docstring above is of Module.store_scope_acquisition:

Cluster QRM-RF parameters#

Sequencer.connect_out0()

Sets/gets whether this sequencer is connected to output 0, and if so which component.

Properties:

value: Enum: {False, True, ‘off’, ‘IQ’}

Sequencer.connect_acq()#

Sets/gets which input the acquisition path of this sequencer is connected to, if any.

Properties:

value: Enum: {False, True, ‘off’, ‘in0’}

Sequencer.sync_en()

Sets/gets sequencer synchronization enable which enables party-line synchronization.

Properties:

value: Boolean

Sequencer.nco_freq()

Sets/gets sequencer NCO frequency in Hz with a resolution of 0.25 Hz. Be aware that the outputs have low-pass filters with a cut-off frequency of 300 MHz

Properties:

unit: Hz
value: Numbers -500000000.0<=v<=500000000.0

Sequencer.nco_phase_offs()

Sets/gets sequencer NCO phase offset in degrees with a resolution of 3.6e-7 degrees.

Properties:

unit: Degrees
value: Numbers 0<=v<=360

Sequencer.nco_prop_delay_comp()

Properties:

unit: ns
value: Numbers -50<=v<=50

Sequencer.nco_prop_delay_comp_en()

Properties:

unit: ns
value: Boolean

Sequencer.marker_ovr_en()

Sets/gets sequencer marker override enable.

Properties:

value: Boolean

Sequencer.marker_ovr_value()

Sets/gets sequencer marker override value. Bit index corresponds to marker channel index.

Properties:

value: Numbers 0<=v<=15

Sequencer.sequence()

Sets sequencer’s AWG waveforms, acquistion weights, acquisitions and Q1ASM program. Valid input is a string representing the JSON filename or a JSON compatible dictionary.

Properties:

value: MultiType: Strings, Dict

Sequencer.trigger1_count_threshold()

Sets/gets threshold for counter on trigger address T1. Thresholding condition used: greater than or equal.

Properties:

value: Numbers 0<=v<=65535

Sequencer.trigger1_threshold_invert()

Sets/gets comparison result inversion for triggeraddress 1.

Properties:

value: Boolean

Sequencer.trigger2_count_threshold()

Sets/gets threshold for counter on trigger address T2. Thresholding condition used: greater than or equal.

Properties:

value: Numbers 0<=v<=65535

Sequencer.trigger2_threshold_invert()

Sets/gets comparison result inversion for triggeraddress 2.

Properties:

value: Boolean

Sequencer.trigger3_count_threshold()

Sets/gets threshold for counter on trigger address T3. Thresholding condition used: greater than or equal.

Properties:

value: Numbers 0<=v<=65535

Sequencer.trigger3_threshold_invert()

Sets/gets comparison result inversion for triggeraddress 3.

Properties:

value: Boolean

Sequencer.trigger4_count_threshold()

Sets/gets threshold for counter on trigger address T4. Thresholding condition used: greater than or equal.

Properties:

value: Numbers 0<=v<=65535

Sequencer.trigger4_threshold_invert()

Sets/gets comparison result inversion for triggeraddress 4.

Properties:

value: Boolean

Sequencer.trigger5_count_threshold()

Sets/gets threshold for counter on trigger address T5. Thresholding condition used: greater than or equal.

Properties:

value: Numbers 0<=v<=65535

Sequencer.trigger5_threshold_invert()

Sets/gets comparison result inversion for triggeraddress 5.

Properties:

value: Boolean

Sequencer.trigger6_count_threshold()

Sets/gets threshold for counter on trigger address T6. Thresholding condition used: greater than or equal.

Properties:

value: Numbers 0<=v<=65535

Sequencer.trigger6_threshold_invert()

Sets/gets comparison result inversion for triggeraddress 6.

Properties:

value: Boolean

Sequencer.trigger7_count_threshold()

Sets/gets threshold for counter on trigger address T7. Thresholding condition used: greater than or equal.

Properties:

value: Numbers 0<=v<=65535

Sequencer.trigger7_threshold_invert()

Sets/gets comparison result inversion for triggeraddress 7.

Properties:

value: Boolean

Sequencer.trigger8_count_threshold()

Sets/gets threshold for counter on trigger address T8. Thresholding condition used: greater than or equal.

Properties:

value: Numbers 0<=v<=65535

Sequencer.trigger8_threshold_invert()

Sets/gets comparison result inversion for triggeraddress 8.

Properties:

value: Boolean

Sequencer.trigger9_count_threshold()

Sets/gets threshold for counter on trigger address T9. Thresholding condition used: greater than or equal.

Properties:

value: Numbers 0<=v<=65535

Sequencer.trigger9_threshold_invert()

Sets/gets comparison result inversion for triggeraddress 9.

Properties:

value: Boolean

Sequencer.trigger10_count_threshold()

Sets/gets threshold for counter on trigger address T10. Thresholding condition used: greater than or equal.

Properties:

value: Numbers 0<=v<=65535

Sequencer.trigger10_threshold_invert()

Sets/gets comparison result inversion for triggeraddress 10.

Properties:

value: Boolean

Sequencer.trigger11_count_threshold()

Sets/gets threshold for counter on trigger address T11. Thresholding condition used: greater than or equal.

Properties:

value: Numbers 0<=v<=65535

Sequencer.trigger11_threshold_invert()

Sets/gets comparison result inversion for triggeraddress 11.

Properties:

value: Boolean

Sequencer.trigger12_count_threshold()

Sets/gets threshold for counter on trigger address T12. Thresholding condition used: greater than or equal.

Properties:

value: Numbers 0<=v<=65535

Sequencer.trigger12_threshold_invert()

Sets/gets comparison result inversion for triggeraddress 12.

Properties:

value: Boolean

Sequencer.trigger13_count_threshold()

Sets/gets threshold for counter on trigger address T13. Thresholding condition used: greater than or equal.

Properties:

value: Numbers 0<=v<=65535

Sequencer.trigger13_threshold_invert()

Sets/gets comparison result inversion for triggeraddress 13.

Properties:

value: Boolean

Sequencer.trigger14_count_threshold()

Sets/gets threshold for counter on trigger address T14. Thresholding condition used: greater than or equal.

Properties:

value: Numbers 0<=v<=65535

Sequencer.trigger14_threshold_invert()

Sets/gets comparison result inversion for triggeraddress 14.

Properties:

value: Boolean

Sequencer.trigger15_count_threshold()

Sets/gets threshold for counter on trigger address T15. Thresholding condition used: greater than or equal.

Properties:

value: Numbers 0<=v<=65535

Sequencer.trigger15_threshold_invert()

Sets/gets comparison result inversion for triggeraddress 15.

Properties:

value: Boolean

Sequencer.cont_mode_en_awg_path0()

Sets/gets sequencer continous waveform mode enable for AWG path 0.

Properties:

value: Boolean

Sequencer.cont_mode_waveform_idx_awg_path0()

Sets/gets sequencer continous waveform mode waveform index or AWG path 0.

Properties:

value: Numbers 0<=v<=1023

Sequencer.upsample_rate_awg_path0()

Sets/gets sequencer upsample rate for AWG path 0.

Properties:

value: Numbers 0<=v<=65535

Sequencer.gain_awg_path0()

Sets/gets sequencer gain for AWG path 0.

Properties:

value: Numbers -1.0<=v<=1.0

Sequencer.offset_awg_path0()

Sets/gets sequencer offset for AWG path 0.

Properties:

value: Numbers -1.0<=v<=1.0

Sequencer.cont_mode_en_awg_path1()

Sets/gets sequencer continous waveform mode enable for AWG path 1.

Properties:

value: Boolean

Sequencer.cont_mode_waveform_idx_awg_path1()

Sets/gets sequencer continous waveform mode waveform index or AWG path 1.

Properties:

value: Numbers 0<=v<=1023

Sequencer.upsample_rate_awg_path1()

Sets/gets sequencer upsample rate for AWG path 1.

Properties:

value: Numbers 0<=v<=65535

Sequencer.gain_awg_path1()

Sets/gets sequencer gain for AWG path 0.

Properties:

value: Numbers -1.0<=v<=1.0

Sequencer.offset_awg_path1()

Sets/gets sequencer offset for AWG path 1.

Properties:

value: Numbers -1.0<=v<=1.0

Sequencer.mixer_corr_phase_offset_degree()

Sets/gets sequencer mixer phase imbalance correction for AWG; applied to AWG path 1 relative to AWG path 0 and measured in degrees

Properties:

value: Numbers -45.0<=v<=45.0

Sequencer.mixer_corr_gain_ratio()

Sets/gets sequencer mixer gain imbalance correction for AWG; equal to AWG path 1 amplitude divided by AWG path 0 amplitude.

Properties:

value: Numbers 0.5<=v<=2.0

Sequencer.mod_en_awg()

Sets/gets sequencer modulation enable for AWG.

Properties:

value: Boolean

Sequencer.demod_en_acq()

Sets/gets sequencer demodulation enable for acquisition.

Properties:

value: Boolean

Sequencer.integration_length_acq()

Sets/gets sequencer integration length in number of samples for non-weighed acquisitions on paths 0 and 1. Must be a multiple of 4

Properties:

value: Numbers 4<=v<=16777212

Sequencer.thresholded_acq_rotation()

Sets/gets sequencer integration result phase rotation in degrees.

Properties:

unit: Degrees
value: Numbers 0<=v<=360

Sequencer.thresholded_acq_threshold()

Properties:

value: Numbers -16777212.0<=v<=16777212.0

Sequencer.thresholded_acq_marker_en()

Enable mapping of thresholded acquisition result to markers.

Properties:

value: Boolean

Sequencer.thresholded_acq_marker_address()

Sets/gets the marker mask which maps the thresholded acquisition result to the markers (M1 to M4).

Properties:

value: Numbers 0<=v<=3

Sequencer.thresholded_acq_marker_invert()

Sets/gets inversion of the thresholded acquistion result before it is masked onto the markers.

Properties:

value: Boolean

Sequencer.thresholded_acq_trigger_en()

Sets/gets mapping of thresholded acquisition result to trigger network.

Properties:

value: Boolean

Sequencer.thresholded_acq_trigger_address()

Sets/gets the trigger address to which the thresholded acquisition result is mapped to the trigger network (T1 to T15)

Properties:

value: Numbers 1<=v<=15

Sequencer.thresholded_acq_trigger_invert()

Sets/gets the inversion of the thresholded acquistion result before it is mapped to the trigger network.

Properties:

value: Boolean

arm_sequencer() → None

Raises:: RuntimeError – An error is reported in system error and debug <= 1. All errors are read from system error and listed in the exception.

Note

This method calls Cluster.arm_sequencer using functools.partial to set the slot index. The docstring above is of Cluster.arm_sequencer:

Note

This method calls Module.arm_sequencer using functools.partial to set the sequencer index. The docstring above is of Module.arm_sequencer:

clear_sequencer_flags() → None: Clear flags

Note

This method calls Cluster.clear_sequencer_flags using functools.partial to set the slot index. The docstring above is of Cluster.clear_sequencer_flags:

Note

This method calls Module.clear_sequencer_flags using functools.partial to set the sequencer index. The docstring above is of Module.clear_sequencer_flags:

connect_sequencer(*connections: str) → None

Parameters:

Raises:

RuntimeError – If the connection command could not be completed due to a conflict.
ValueError – If parsing of a connection fails.

Note

This method calls Cluster.connect_sequencer using functools.partial to set the slot index. The docstring above is of Cluster.connect_sequencer:

Note

This method calls Module.connect_sequencer using functools.partial to set the sequencer index. The docstring above is of Module.connect_sequencer:

delete_acquisition_data(name: str = '', all: bool = False) → None

Delete data from an acquisition specified by name in the acquisition list of indexed sequencer or delete data in all acquisitions if all is True.

Parameters:: name (str) – Weight name
Raises:: NotImplementedError – Functionality not available on this module.

Note

This method calls Cluster.delete_acquisition_data using functools.partial to set the slot index. The docstring above is of Cluster.delete_acquisition_data:

Note

This method calls Module.delete_acquisition_data using functools.partial to set the sequencer index. The docstring above is of Module.delete_acquisition_data:

delete_dummy_binned_acquisition_data(acq_index_name: str | None = None)

Delete all dummy binned acquisition data for the dummy.

Parameters:: acq_index_name (Optional[str]) – Acquisition index name.

Note

This method calls Cluster.delete_dummy_binned_acquisition_data using functools.partial to set the slot index. The docstring above is of Cluster.delete_dummy_binned_acquisition_data:

Note

This method calls Module.delete_dummy_binned_acquisition_data using functools.partial to set the sequencer index. The docstring above is of Module.delete_dummy_binned_acquisition_data:

delete_dummy_scope_acquisition_data(): Delete dummy scope acquisition data for the dummy.

Note

This method calls Cluster.delete_dummy_scope_acquisition_data using functools.partial to set the slot index. The docstring above is of Cluster.delete_dummy_scope_acquisition_data:

Note

This method calls Module.delete_dummy_scope_acquisition_data using functools.partial to set the sequencer index. The docstring above is of Module.delete_dummy_scope_acquisition_data:

get_acquisition_state(timeout: int = 0, timeout_poll_res: float = 0.02) → bool

Parameters:

timeout (int) – Timeout in minutes.
timeout_poll_res (float) – Timeout polling resolution in seconds.
check_seq_state (bool) – Check if sequencer is done before checking acquisition state.

Returns:

Indicates the acquisition binning completion state (False = uncompleted, True = completed).

Return type:

bool

Raises:

TimeoutError – Timeout
NotImplementedError – Functionality not available on this module.

Note

This method calls Cluster.get_acquisition_state using functools.partial to set the slot index. The docstring above is of Cluster.get_acquisition_state:

Note

This method calls Module.get_acquisition_state using functools.partial to set the sequencer index. The docstring above is of Module.get_acquisition_state:

get_acquisition_status(timeout: int = 0, timeout_poll_res: float = 0.02) → bool

Parameters:

timeout (int) – Timeout in minutes.
timeout_poll_res (float) – Timeout polling resolution in seconds.
check_seq_state (bool) – Check if sequencer is done before checking acquisition status.

Returns:

Indicates the acquisition binning completion status (False = uncompleted, True = completed).

Return type:

bool

Raises:

TimeoutError – Timeout
NotImplementedError – Functionality not available on this module.

Note

This method calls Cluster.get_acquisition_status using functools.partial to set the slot index. The docstring above is of Cluster.get_acquisition_status:

Note

This method calls Module.get_acquisition_status using functools.partial to set the sequencer index. The docstring above is of Module.get_acquisition_status:

get_acquisitions() → Dict

name: acquisition name
- index: acquisition index used by the sequencer Q1ASM program to refer to the acquisition.
- acquisition: acquisition dictionary
  scope: Scope data
  
  path0: input path 0
  
  data: acquisition samples in a range of 1.0 to -1.0.
  
  out-of-range: out-of-range indication for the entire acquisition (False = in-range, True = out-of-range).
  
  avg_cnt: number of averages.
  
  path1: input path 1
  
  data: acquisition samples in a range of 1.0 to -1.0.
  
  out-of-range: out-of-range indication for the entire acquisition (False = in-range, True = out-of-range).
  
  avg_cnt: number of averages.
  
  bins: bin data
  
  integration: integration data
  
  path_0: input path 0 integration result bin list
  
  path_1: input path 1 integration result bin list
  
  threshold: threshold result bin list
  
  valid: list of valid indications per bin
  
  avg_cnt: list of number of averages per bin

Returns:: Dictionary with acquisitions.
Return type:: dict
Raises:: NotImplementedError – Functionality not available on this module.

Note

This method calls Cluster.get_acquisitions using functools.partial to set the slot index. The docstring above is of Cluster.get_acquisitions:

Note

This method calls Module.get_acquisitions using functools.partial to set the sequencer index. The docstring above is of Module.get_acquisitions:

get_sequencer_state(timeout: int = 0, timeout_poll_res: float = 0.02) → qblox_instruments.native.generic_func.SequencerState

Parameters:

timeout (int) – Timeout in minutes.
timeout_poll_res (float) – Timeout polling resolution in seconds.

Returns:

Tuple containing sequencer status and corresponding flags.

Return type:

SequencerState

Raises:

TimeoutError – Timeout

Note

This method calls Cluster.get_sequencer_state using functools.partial to set the slot index. The docstring above is of Cluster.get_sequencer_state:

Note

This method calls Module.get_sequencer_state using functools.partial to set the sequencer index. The docstring above is of Module.get_sequencer_state:

get_sequencer_status(timeout: int = 0, timeout_poll_res: float = 0.02) → qblox_instruments.native.generic_func.SequencerStatus

Parameters:

timeout (int) – Timeout in minutes.
timeout_poll_res (float) – Timeout polling resolution in seconds.

Returns:

Tuple containing sequencer status and corresponding flags.

Return type:

SequencerState

Raises:

TimeoutError – Timeout

Note

This method calls Cluster.get_sequencer_status using functools.partial to set the slot index. The docstring above is of Cluster.get_sequencer_status:

Note

This method calls Module.get_sequencer_status using functools.partial to set the sequencer index. The docstring above is of Module.get_sequencer_status:

get_trigger_thresholding(address: int) → Tuple

Gets threshold for designated trigger address counter, together with the inversion condition. Thresholding condition used: greater than or equal.

Parameters:

address (int) – Trigger address to which the settings are applied

Returns:

int – Threshold
bool – Comparison result inversion

Raises:

NotImplementedError – Functionality not available on this module.

get_waveforms() → Dict

Get all waveforms and weigths in the AWG waveform list of indexed sequencer. The returned dictionary is structured as follows:

name: waveform name.
- data: waveform samples in a range of 1.0 to -1.0.
- index: waveform index used by the sequencer Q1ASM program to refer
  to the waveform.

Returns:: Dictionary with waveforms.
Return type:: dict

Note

This method calls Cluster.get_waveforms using functools.partial to set the slot index. The docstring above is of Cluster.get_waveforms:

Note

This method calls Module.get_waveforms using functools.partial to set the sequencer index. The docstring above is of Module.get_waveforms:

get_weights() → Dict

Get all weigths in the acquisition weight lists of indexed sequencer. The returned dictionary is structured as follows:

-name : weight name.

data: weight samples in a range of 1.0 to -1.0.

index: weight index used by the sequencer Q1ASM program to refer
to the weight.

Returns:: Dictionary with weights.
Return type:: dict
Raises:: NotImplementedError – Functionality not available on this module.

Note

This method calls Cluster.get_weights using functools.partial to set the slot index. The docstring above is of Cluster.get_weights:

Note

This method calls Module.get_weights using functools.partial to set the sequencer index. The docstring above is of Module.get_weights:

reset_trigger_thresholding() → None

Resets trigger thresholds for all trigger address counters (T1 to T15) back to 0. Also resets inversion back to false.

Raises:: NotImplementedError – Functionality not available on this module.

property seq_idx(self) → int

Get sequencer index.

Returns:: Sequencer index
Return type:: int

set_dummy_binned_acquisition_data(acq_index_name: str, data: Iterable[qblox_instruments.ieee488_2.dummy_transport.DummyBinnedAcquisitionData | None])

Set dummy binned acquisition data for the dummy.

Parameters:

acq_index_name (str) – Acquisition index name.
data (Iterable[Union[DummyBinnedAcquisitionData, None]]) – Dummy data for the binned acquisition. An iterable of all the bin values.

Note

This method calls Cluster.set_dummy_binned_acquisition_data using functools.partial to set the slot index. The docstring above is of Cluster.set_dummy_binned_acquisition_data:

Note

This method calls Module.set_dummy_binned_acquisition_data using functools.partial to set the sequencer index. The docstring above is of Module.set_dummy_binned_acquisition_data:

set_dummy_scope_acquisition_data(data: qblox_instruments.ieee488_2.dummy_transport.DummyScopeAcquisitionData)

Set dummy scope acquisition data for the dummy.

Parameters:: data (DummyScopeAcquisitionData) – Dummy data for the scope acquisition.

Note

This method calls Cluster.set_dummy_scope_acquisition_data using functools.partial to set the slot index. The docstring above is of Cluster.set_dummy_scope_acquisition_data:

Note

This method calls Module.set_dummy_scope_acquisition_data using functools.partial to set the sequencer index. The docstring above is of Module.set_dummy_scope_acquisition_data:

set_trigger_thresholding(address: int, count: int, invert: bool) → None

Sets threshold for designated trigger address counter, together with the inversion condition. Thresholding condition used: greater than or equal.

Parameters:

address (int) – Trigger address to which the settings are applied
count (int) – Threshold
invert (bool) – Comparison result inversion

Raises:

NotImplementedError – Functionality not available on this module.

start_sequencer() → None

Raises:: RuntimeError – An error is reported in system error and debug <= 1. All errors are read from system error and listed in the exception.

Note

This method calls Cluster.start_sequencer using functools.partial to set the slot index. The docstring above is of Cluster.start_sequencer:

Note

This method calls Module.start_sequencer using functools.partial to set the sequencer index. The docstring above is of Module.start_sequencer:

stop_sequencer() → None

Raises:: RuntimeError – An error is reported in system error and debug <= 1. All errors are read from system error and listed in the exception.

Note

This method calls Cluster.stop_sequencer using functools.partial to set the slot index. The docstring above is of Cluster.stop_sequencer:

Note

This method calls Module.stop_sequencer using functools.partial to set the sequencer index. The docstring above is of Module.stop_sequencer:

store_scope_acquisition(name: str) → None

Parameters:: name (str) – Acquisition name.
Raises:: NotImplementedError – Functionality not available on this module.

Note

This method calls Cluster.store_scope_acquisition using functools.partial to set the slot index. The docstring above is of Cluster.store_scope_acquisition:

Note

This method calls Module.store_scope_acquisition using functools.partial to set the sequencer index. The docstring above is of Module.store_scope_acquisition: